Skip to toolbar
Tips

How to Remove Calcium Deposits from Faucet?

Tap water has several minerals that leave your kitchen faucet with a cloudy and dull appearance. The minerals are the ones that cause calcium build-up and end up staining your kitchen sink faucet. With the evaporating water, mineral water leaves behind marks those later form scaly and hard deposits. However, the build-up should not worry you since the solution is accessible. Numerous Eco-friendly faucet cleaners work great when removing calcium deposits. Let’s look at easy steps on how to remove calcium deposits from the faucet.

How to Remove Calcium Deposits from Faucet

Step 1-Picking the cleaner

While there are many cleaners to choose from, the acid ones are most effective when it comes to calcium and other minerals in the faucet or shower-heads. The following are acidic cleaners that you are likely to own at home. Some of them include:

  • White vinegar
  • Lemon juice
  • CLR cleaner
  • Sulfuric acid
  • Phosphoric acid

Step 2: Collect the material you need

Before getting down to the cleaning, you need to make sure the following materials are within your reach.

  • Gloves
  • Plastic bag
  • Towel or a rag
  • A toothbrush or a sponge
  • Safety goggles
  • Rubber band
  • Pliers

Step 3: Removing the faucet aerator

Many of the DIY websites say that the ideal way to remove the calcium deposit in the faucet is by the use of a plastic bag. However, the approach may only remove the calcium building up on the outer part. If you intend to eliminate the calcium in the inner side of the faucet, you need to remove the aerator from the base and clean them independently.

Removing the aerator

You can find it on the faucet head at the tip. To do so, take a pair of pliers, grip the aerator, twist it clockwise until it comes off. As you confiscate it, stay keen on other attachments to make it easy when you need to re-attach it. Now that the aerator is not hindering you from cleaning the faucet go ahead with the process.

Step 4: Immerse the aerator parts in the acid

Once you disassemble the aerator, pick your gloves and decant the acid in a basin or bowl. With care, submerge the parts inside. During immersion, caution is crucial since you need to heed instructions on the label during the dilution process. Acids, especially the stronger ones, can harm you if you do things badly. Similarly, it is good to know the immersion period. For other parts, fill the cleaner in the plastic bag and tie it around the faucet parts. Bind the parts using an elastic band.

Step 5: Rinse the parts in running water as you scrub them

Once you finish soaking the aerator, pick a soft cloth or a soft toothbrush, and scrub it. The action removes the debris and metal deposits that attach to the fixture. NB! The step is a crucial one since if you fail to rinse off the acid thoroughly, they may eat up the metal if left there for long.

Clean the deposits from the aerator by twisting the faucet enclosure in the filter screen. To eliminate every stain, scrub the loose debris with a toothbrush as you rinse the fixture. If the aerator has mineral deposits all over, this is still the process to use. If you do not wish to use the acid, you can fill a bowl with vinegar, soak the faucet and then scrub off the calcium. It still obliterates the minerals. However, if the calcium deposits eat up the faucet, the best way is to replace the fixture.

Step 6: Reconnecting faucet pieces

Now that the aerator is clean, it is time to reconnect them ready for work. As you reconnect them, make sure that gaskets and other fixtures stay in order. Once you finish reconnecting, turn back the water supply for a fully functioning kitchen sink!

Calcium build-up prevention may be the right way!

Living in hard water places? Well, you will not need to repeat this process a few times, as this will keep happening. Calcium build-up won’t stop. With that in mind, a long-term solution is what you need. Among the ideal ways to fight with the issue is using a water softening mechanism. The technology is helpful as it will aid in softening the water you use at home. The process involves the removal of the hard and damaging minerals lie calcium from your water line. Once you do that, calcium build-up will remain a memory.

Final verdict

With the above information, it is clear that getting rid of the irritating stains is easy. The calcium deposits are not only harmful to the faucet. They are also ugly enough for guests to question your level of hygiene in the kitchen. Thinking of that, quick steps are crucial to combat these awful stains. However, as long as you keenly follow the above steps, you will remain a happy and confident homeowner!

Nestlords
Logo
Login/Register access is temporary disabled