Skip to toolbar

How to Remove Scratches from Stainless Steel Sink

A stainless-steel sink is a common kitchen trend. Though it is made of durable material, it is highly prone to scratches resulting from daily activities. A scratched sink can remove the beauty of your kitchen and leave you wondering how to remove scratches from stainless steel sink. This should not worry you anymore. All you need is to have patience since scratch removal is a gradual process. In the end, your sink is left with a brand new look. Through this article, go with me to get enlightened on the steps you should take when removing scratches from your stainless steel sink.

Materials to use

  • Warm water
  • Liquid abrasive cleaning product
  • A stainless steel scratch removal kit
  • A synthetic fiber cloth
  • Sponges or soft scouring pad
  • A rubber sanding block
  • A clean lint-free towel
  • 1000-grit sandpaper
  • A rubber sanding block
  • 600-grit sandpaper
  • Stainless sink polish
  • A bucket
  • Liquid dish detergent

Steps to follow when removing scratches from your steel sink

Step 1

Before taking any step of scratch removal, you should first check the type of stainless steel you are working on. There are many varieties of grades and finishes on stainless steel. You can enquire from the appliance manufacturer to be sure about the type that you are working with. You can also rid the stainless steel sink of scratches and wear and tear marks. From the manufacturer’s instructions, you can know which scratch remover you need to use on your sink.

Step 2

Determine the grain pattern of your sink once you have settled on the kind of remover you will use. The instruction manual plays a great role in enlightening you on the direction of the sink’s grain. You can also determine the direction of the surface grain by keenly observing your sink when cleaning your sink. You need to clean along the grains for you to have the best outcome. You are also minimizing the energy you use during your cleaning when you go along the grain.

Step 3

At this point, you are ready to start your scratch removal task. Put the remover on the scratches on your sink. The stain remover is supposed to come with a grit pad. Put the right scratch remover by spraying according to the guidelines in the instructions manual. Apply the remover gently onto the scratched surface following the direction of the sink’s grain. Continue applying the remover as you gradually add pressure on your scrubbing to ensure the scratch comes off your sink. Remember not to apply too much pressure to avoid damaging your sink.

Step 4

Polish the remaining scratch using a soft cloth. You should use the lighter pad from your kit. In your scratch remover kit, check for a second, lighter pad. After removing much of the scratches, take the lighter pad to puff out any other remaining scratches. If the instruction manual calls for any additional water, then add as you continue buffing. Again, the manual should instruct you on how to buff the scratch out and also when to take which pad. 

Step 5

After ensuring that you have buffed the scratch out, you will need to buff all the remaining remover using a microfiber cloth. Wipe all the surfaces of your sink to ensure you rinse out all the scratch remover. You can continue adding water when there is a need, to ensure that you have completely removed the scratch remover.

Step 6

Add a liquid abrasive product on a soft scouring pad. Ensure that the cleaning product you are using is good for your stainless steel sink. Rub thoroughly on the affected area to make sure it blends well with other surroundings of your sink. Again, ensure that you do not use much pressure to avoid any damage to your sink. If your sink has grains, rub towards the direction of those grains. Occasionally wipe the sink to check if the scratch has completely disappeared until you are satisfied with the results. Once you get what you wanted, rinse your sink with warm water, liquid detergent, and a clean sponge. Using a dry towel, wipe your sink, and apply stainless sink polish for a better shine.  

How to remove severe scratches from stainless steel sink

Sometimes, our sink gets larger imperfections that do not respond to simple washing compounds. They need to be scrubbed thoroughly if you want to restore your sink’s fine surface. When doing the scrubbing, ensure you follow the manufacturer’s directions concerning your specific kit to avoid more damage. Here are the steps to follow when cleaning severe scratches. 

Step 1

Run warm water through your sink to rinse. Close the sink with its stopper and fill it with warm water and liquid dish detergent. Take a sponge and submerge it in the water and start cleaning your sink as you pay more attention to the scratched areas.

Step 2

After you have done enough cleaning on the most affected areas, you can let the water to drain out by removing the stopper. Observe your sink keenly and mark all the areas you may have missed when you were cleaning with a sponge. Wipe your sink to dry with a dry piece of cloth and mark all the locations of the scratches. 

Step 3

Put 1000-grit sandpaper on a rubber sanding block. Take a bucket of water and fill it with clean warm water. Immerse the sanding block in the bucket and let the sandpaper suck up the water. Wet-sand the sink on the scratched area using constant pressure. Scrub the scratches alongside the grain without stopping. Occasionally rewet your sanding block as you check the affected area frequently to make sure that the scratch is disappearing.  

Step 4

If you notice that the scratch is not fading, join the 600-grit sandpaper on your rubber sanding block. Redo the process of the wet–sanding process as you frequently check if the scratch is disappearing. Scrub until the scratches come out.

Step 5

After the scratch has disappeared, rub the area using gentle pressure to blend the area with the rest of the sink. Ensure you scrub along the sink’s grains every time you are cleaning your sink’s surface. Frequently wipe the sink to check if you have gotten your desired results. Using warm water, liquid dish detergent, and a sponge, wash your sink and dry it thoroughly using a clean towel. For better results, you can apply a stainless sink polish.

Video Source: Willie Kuronen

For your sink to last long and have a pleasant look, avoid frequent washing with abrasive substances and steel wool. These small steel fibers may cause rust spots when they break off and cause more harm to your stainless steel sink. You can use a rubber dish mat to protect your sink when washing cast iron and heavy pots.

Ensure that you have removed the mat once you finish your washing, to avoid trapping water underneath. Trapped water can discolor your sink and cause a bad smell. It is also a breeding ground for germs and is unhygienic. With this review, we are certain that you will have the best adventure and results as you go about your kitchen activities.

Login/Register access is temporary disabled